AuthorTopic: what master cylinder to use  (Read 2219 times)

0 Members and 1 Guest are viewing this topic.

Offline just old

  • Global Moderator
  • Rat Rods or Nothing
  • *****
  • Posts: 580
  • Activity:
    2.6%
  • Referrals: 0
what master cylinder to use
« on: August 18, 2014, 04:54:01 PM »
Ok I have all 4 wheels with disc brakes is there a spiecel master cylinder to use I have been looking at them on the web and there are so meanie to choose from . do I need the boost . Or can I run with out it ?

art

Offline Rubberhead

  • Serious Rat Rodder
  • ****
  • Posts: 456
  • Activity:
    0%
  • Referrals: 0
Re: what master cylinder to use
« Reply #1 on: August 18, 2014, 05:09:26 PM »
I'm using this one; says that it's suitable for four wheel disc brakes:

http://www.speedwaymotors.com/Master-Cylinder-Pedal-Assembly-for-Model-T-A-1932-Ford,3285.html

I heavily modified the assembly of course...

Offline just old

  • Global Moderator
  • Rat Rods or Nothing
  • *****
  • Posts: 580
  • Activity:
    2.6%
  • Referrals: 0
Re: what master cylinder to use
« Reply #2 on: August 19, 2014, 04:26:41 AM »
thanks I may be able to use that .  the only thing is I am running a 4 speed so I have a clutch also to fit in there . but may be able to modi it some way to work . there is not a lot of room down there to work in .

Offline just old

  • Global Moderator
  • Rat Rods or Nothing
  • *****
  • Posts: 580
  • Activity:
    2.6%
  • Referrals: 0
Re: what master cylinder to use
« Reply #3 on: September 05, 2014, 03:09:57 PM »
I ended up using a master clinder and bolted it to the fire wall . had a picture of a pedel assembly that was made on the forum and tried to copy it not quit done but it looks like it will work . also have to install clutch pedal , there is not a lot of work between the tunnel and the out side of the body . if I ever do another it will be automatic for sure .

Offline hotwheels

  • Rat Rod Builder
  • Administrator
  • Rat Rods or Nothing
  • *****
  • Posts: 8978
  • Vehicle: 1947 Ford Pickup
  • Activity:
    0%
  • Referrals: 9
    • Rat Rod Nation
Re: what master cylinder to use
« Reply #4 on: September 05, 2014, 03:21:38 PM »
Glad you were able to come up with a brake system. I think the clutch will be a tough install, but once you get er, it will be nice.
Love building rat rods, driving mustangs, and building websites.

Offline just old

  • Global Moderator
  • Rat Rods or Nothing
  • *****
  • Posts: 580
  • Activity:
    2.6%
  • Referrals: 0
Re: what master cylinder to use
« Reply #5 on: September 06, 2014, 02:32:47 PM »
I have the pedals installed , they look good to me . what do you guys think

Offline hotwheels

  • Rat Rod Builder
  • Administrator
  • Rat Rods or Nothing
  • *****
  • Posts: 8978
  • Vehicle: 1947 Ford Pickup
  • Activity:
    0%
  • Referrals: 9
    • Rat Rod Nation
Re: what master cylinder to use
« Reply #6 on: September 06, 2014, 03:04:14 PM »
Turned out good. Great job.
Love building rat rods, driving mustangs, and building websites.

Tags:
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40