Rat Rod Nation - A place for motorheads
Rat Rod Nation builds => Rat Rod Welding/Metalworking Discussions => Topic started by: just old on February 22, 2015, 02:57:52 PM
-
just a pic of what the headers turned out like .with the steering all hooked up . I thought the steering wheel was unique . but it does not work well sitting on the floor with no power .on the steering it is lock to lock in a half a turn or the steering is very quick , maybe to quick
-
Your pitman arm is pretty long. That could contribute to both issues.
-
Loving the square headers. The steering arm looks long but if you shorten it too much bump steer may become a problem
-
Love the square headers too........very unique.
-
Just thought about a device we used on out dirt cars Its a steering quickener
http://www.speedwaymotors.com/Speedway-Small-Body-21-Steering-Quickener,8280.html (http://www.speedwaymotors.com/Speedway-Small-Body-21-Steering-Quickener,8280.html)
Can be used backwards to slow it down Don't know if it'll work for you Just a thought
-
I have seen them before , not really sure were you could put it on this . they were used with a steering column and fit in a shaft type . I will have to wait and see how it works , worst case is I would have to go to a reg. type steering box .
-
Yeah, those headers turned out pretty damn nice!
-
thanks every one I thought they came out pretty good . made some changes along the line , but that seems to be everything I have made for this thing . but I think I am all most done ?