Rat Rod Nation builds > Rat Rod Welding/Metalworking Discussions

frame and body question

(1/2) > >>

just old:
well the truck did not sale which is ok . so here is the question . will my 34 ford truck cab fit on a S-10 frame ? may be a dumb idea

choppertodd:
Just read where a guy did it whit an old chevy just had too shorten the bed some

Sent from my SAMSUNG-SM-N900A using Tapatalk

obama:
I think if you measure the width at the front of the cowl of the 34 it is probably too narrow to fit.  Would not be my first choice for either donor.

miraclepieco:
I rescued my '34 truck from a farmer who was trying to mount it on an S10 frame. What a fiasco! Didn't fit, didn't work, looked horrible. Although S10 frames are great for many later model vehicles where the frame is hidden (like my '50 Chevy pickup) they are not suited for 1934 and below which were designed to mount on a flat frame.

Here is my '34, properly set up with a home-built box tube frame, old Ford dropped I-beam axle, transverse leaf spring, wishbone front end as the HAMB intended   ::) :-* :-X







 

just old:
over all how did I ride , my truck is very stiff . I no I should have spent more time looking at diff. ways to make it ride better . now I would like to make some changes . in both the front and rear .  the cab is also very cramped . for any long rides 

Navigation

[0] Message Index

[#] Next page