AuthorTopic: Bracket  (Read 2514 times)

0 Members and 1 Guest are viewing this topic.

Offline PetroUW

  • Rat Lover
  • *
  • Posts: 13
  • Activity:
    0%
  • Referrals: 0
Bracket
« on: May 24, 2013, 11:56:04 PM »
So got a question for y'all.   I have a sbc 350 with heads that dont have accessory holes and angle dump ram horns.  My delima is that the "standard" exhaust bolt power steering bracket does not seem to work with the ram horns.  Know if there is one made for this or any fabrication ideas?

Offline obama

  • Global Moderator
  • Rat Rods or Nothing
  • *****
  • Posts: 2991
  • Activity:
    0%
  • Referrals: 1
Re: Bracket
« Reply #1 on: May 25, 2013, 06:36:02 AM »
There are a couple of different brackets that they used on SBC power steering, and there is a bracket available from speedway, summit, and a few others as I recall. Make sure you address the alt bracket at the same time.

Offline hotwheels

  • Rat Rod Builder
  • Administrator
  • Rat Rods or Nothing
  • *****
  • Posts: 9053
  • Vehicle: 1947 Ford Pickup
  • Activity:
    0%
  • Referrals: 9
    • Rat Rod Nation
Re: Bracket
« Reply #2 on: May 25, 2013, 06:46:05 AM »
If you have to get rid of the power steering for now and just run a short belt.  I know they sell the brackets at speewaymotors dustin, but i don't know if you have time to wait, especially since this is a holiday weekend.
Love building rat rods, driving mustangs, and building websites.

Offline PetroUW

  • Rat Lover
  • *
  • Posts: 13
  • Activity:
    0%
  • Referrals: 0
Re: Bracket
« Reply #3 on: May 25, 2013, 07:02:46 AM »
Thanks guys, found the block mount ones.  Now scowering to see if some one has one or if I do need to order from speedway and wait.