Rat Rod Nation - A place for motorheads
Rat Rod Nation builds => Rat Rod Builds => Topic started by: hollisc10 on September 02, 2015, 09:32:36 PM
-
Done it again sold my 50 but bought a super solid 49 that could pass as its twin. My plans are to leave this one the factory short bed length but still use the s10 frame. The truck is currently on the original frame with a sub frame of some kind. I already have a engine and trans that has almost 135,000 when I pulled it tonight now I just got to find an extra can frame to cut down.(http://images.tapatalk-cdn.com/15/09/02/fb131110ff51ccb42b3fe849b58f24ea.jpg)(http://images.tapatalk-cdn.com/15/09/02/a65a98a78dd7324786debf6a349cb7a6.jpg)(http://images.tapatalk-cdn.com/15/09/02/a25d4e733b5f5073fd7910ed71e66455.jpg)(http://images.tapatalk-cdn.com/15/09/02/f7f9b6b3a48f6c391aed1b05a9691e4f.jpg)(http://images.tapatalk-cdn.com/15/09/02/588fcade33cff971605d64d2c06a9a3a.jpg)(http://images.tapatalk-cdn.com/15/09/02/947257c01f9032b76d54a154fcc6066a.jpg)(http://images.tapatalk-cdn.com/15/09/02/55f5cb06876fad0e029aeedc9355acb3.jpg)(http://images.tapatalk-cdn.com/15/09/02/cda56c1a9a1b2e5a40d9d64707c95df6.jpg)(http://images.tapatalk-cdn.com/15/09/02/c117729751ce7fff2f2fc4b6095b1e3b.jpg)
-
That's awesome. Looking forward to another great build thread.
-
Got a extra cab s10 today to cut down for the truck. I also have a swb s10 frame and another truck that's in my way. I will build me a driver then build another to trade on. Gonna be a busy winter here.(http://images.tapatalk-cdn.com/15/09/07/36d65962e8229cb1428682cb4af41822.jpg)(http://images.tapatalk-cdn.com/15/09/07/eb2bcea326d2edf38d43a7b0818b414a.jpg)
These two will go with the Tahoe drive train. (http://images.tapatalk-cdn.com/15/09/07/d0942456da4c9ef8b6be16653b932683.jpg)(http://images.tapatalk-cdn.com/15/09/07/c5ce5a371e4b1021b44f23a4ed8cd26b.jpg)
These two will go with a drive train from an extra cab Silverado
-
The black one looks like a good solid body!!
-
The black one looks like a good solid body!!
Black truck is a solid truck the green one is rough but I have another cab that's 10x better I'll use.
-
You do a good job on these trucks, look'n forward to the upcoming builds.
-
Two builds? Your a mad man. Lol
-
You do a good job on these trucks, look'n forward to the upcoming builds.
Thanks
-
Two builds? Your a mad man. Lol
One at a time I've not got enough room to do both.
-
I can already see it. Building both, bringing one in, doing a few things and pushing it out. Bringing in the second, doing a few things. Next thing you know, two builds done about the same time frame.
-
One almost ready! Ha I wish it was this easy!(http://images.tapatalk-cdn.com/15/09/13/6717ad680de22d6b344878fcc0784442.jpg)
-
Got my frame cut down to size. Now to cut all the stuff I don't need off.(http://images.tapatalk-cdn.com/15/09/13/4bee652033e4ad6cf990cc299c152574.jpg)(http://images.tapatalk-cdn.com/15/09/13/1bd2484c7807121f386ff632a75f2644.jpg)
-
Progress for tonight! Cab is just sitting on but I'm gonna try to make the mounts tomorrow evening!(http://images.tapatalk-cdn.com/15/09/13/122f08102c8d451729bf8799dc891ac9.jpg)
-
Looks good.
-
After a trip to Rod Run this weekend I now have wheels and tires and a whole list of goodies for the truck!(http://images.tapatalk-cdn.com/15/09/20/481517048a9d282f48fb0fd3d0f3136f.jpg)(http://images.tapatalk-cdn.com/15/09/20/4126d0124f00d2856812d0c632876834.jpg)
-
Wow, those are nice.
-
Orta' work well!!!
-
Been sick so I haven't gotten much done. I finally went out and made the cab mounts so that's done. Hopefully I can get a little more done this weekend.(http://images.tapatalk-cdn.com/15/09/23/e86d0f620636b9462a3c59093a111e13.jpg)(http://images.tapatalk-cdn.com/15/09/23/d25abdb7f46662a01e171982e173ca20.jpg)
-
Front sheet metal is mounted but gotta take it back apart to put engine and trans in. (http://images.tapatalk-cdn.com/15/09/24/c221ee0b4abd7d6816955ab81bbdd62c.jpg)(http://images.tapatalk-cdn.com/15/09/24/c864c89b5c5ea5b8f24a96b9f2279324.jpg)
Gonna look nice with all the new chrome!
-
Damn, you have your builds down to an art.
-
Damn, you have your builds down to an art.
Thanks man!
-
(http://images.tapatalk-cdn.com/15/09/28/5318b62b311587ae84720963910eddbd.jpg)(http://images.tapatalk-cdn.com/15/09/28/8b771cc9ea162100e431bf26486a05ae.jpg)(http://images.tapatalk-cdn.com/15/09/28/bdb2228858311b3f962f9fd05f62bdcb.jpg)
Motor and trans are in after an all nighter Saturday! I also put the new grill between those big fenders!
-
Uh, from the looks of those front tires I'd recommend an alignment before you drive it much! ???
-
Damn, that engine looks good in there.
-
Uh, from the looks of those front tires I'd recommend an alignment before you drive it much! ???
Yea I was thinking the same thing new tires wouldn't last long on it I'd say.
-
Damn, that engine looks good in there.
Yep I like the 5.3 it's my go to engine now!
-
Got some parts today the 98 Camaro manifolds and thrush muffler are what I like to use! I lost my bolts for the drivers side so I only got one side done tonight.(http://images.tapatalk-cdn.com/15/09/30/f30558919331854b74fc6f6227c75e6f.jpg)(http://images.tapatalk-cdn.com/15/09/30/97bb070e30a7cd0bcc6fa6a27a32cccc.jpg)
-
Those look good.
-
Got the driver side manifold done tonight and the dog house back on. Got some more stuff to gather up but it's looking good!(http://images.tapatalk-cdn.com/15/10/01/39370b40f4b5bc776d9f214bb66243b0.jpg)(http://images.tapatalk-cdn.com/15/10/01/741da62053e69ae117b728f752375e19.jpg)
-
Looks like you'll have this one done in a couple more weeks at the rate you're going..
LOOKS GOOD!!!
-
Agreed
-
Looks like you'll have this one done in a couple more weeks at the rate you're going..
LOOKS GOOD!!!
Ha thanks
-
Got the brake in and all the lines ran. Need to do some bleeding and maybe start plumbing the fuel lines next!(http://images.tapatalk-cdn.com/15/10/08/2baf91a8e93df6c93c033b99b174f9a4.jpg)(http://images.tapatalk-cdn.com/15/10/08/480a264e0bb16ef446bc9807df9c2bf1.jpg)
-
Look in gud...
-
(http://images.tapatalk-cdn.com/15/10/12/9327bfe8b31c1b733d15b3470ee4293f.jpg)(http://images.tapatalk-cdn.com/15/10/12/74337b40a9629b4a6008e609f8025968.jpg)(http://images.tapatalk-cdn.com/15/10/12/4df011cccef8952ad373c828d5e3c7fd.jpg)
Shifter is in and I'm gonna bend my floor tunnel today! I might get it all in and the floor finished before the weekend.
-
You definitely have this operation DOWN!!!
-
You definitely have this operation DOWN!!!
Thanks!
-
I bent the tunnel parts at work today and got them all tacked in place. I might finish the floor this week sometime.(http://images.tapatalk-cdn.com/15/10/12/4f358c24027de9d4a84b182646d5c13d.jpg)
-
Nice.
-
Tunnel is done and the firewall holes have been covered.(http://images.tapatalk-cdn.com/15/10/14/c1f00a10c9f9ca58c1e3902c206a192d.jpg)(http://images.tapatalk-cdn.com/15/10/14/36a398617f5e6e5827820a08693d7748.jpg)
-
Made some progress today. I got the fuel tank all finished up and the bed fixed and mounted. I even found a little time to put my roll pan on. (http://images.tapatalk-cdn.com/15/10/18/135ce06105e0084757a8dc554eba80ea.jpg)(http://images.tapatalk-cdn.com/15/10/18/0a482ca9ba8fd47bdb6bfcf15ea298bf.jpg)(http://images.tapatalk-cdn.com/15/10/18/8f6f72920c03b757d4b575169f432fbf.jpg)(http://images.tapatalk-cdn.com/15/10/18/4b294ae04c06a98e29fba6c2593e1e3e.jpg)(http://images.tapatalk-cdn.com/15/10/18/737600c99f3484413390740f91b574bb.jpg)(http://images.tapatalk-cdn.com/15/10/18/aa5d494198d88f4450b11a24eb3daebe.jpg)(http://images.tapatalk-cdn.com/15/10/18/c6d9d25a3609de87b42c51cab7a3a182.jpg)
I got my column in a few nights ago forgot to post that!
-
Schweet...
-
Running boards are mounted. (http://images.tapatalk-cdn.com/15/10/19/ed62e175c7c5a260246d3b4231b3c862.jpg)(http://images.tapatalk-cdn.com/15/10/19/875c9fe12ae9815e3a29cad368b45fb5.jpg)
-
It Just keeps rollin' along!! Nice work!!
-
Totally agree.
-
It Just keeps rollin' along!! Nice work!!
Thanks
-
Totally agree.
Thanks
-
Made some taillight brackets tonight and got the bracket made for my electronic gas pedal. I had to cut my front end back loose and pull the radiator support out so I can have room for the upper radiator hose. Also got my mounts to hold the 5.3 computer in place. I've still got a long way to go but slowly getting there! Oh yea I also got another box of goodies to work with later!(http://images.tapatalk-cdn.com/15/10/22/5994393269d8ec7f2a6c0b1b20088220.jpg)(http://images.tapatalk-cdn.com/15/10/22/d1cc7e7dbd2942d2a71f036830d1b07a.jpg)(http://images.tapatalk-cdn.com/15/10/22/27602f4086fc4f8110c9e061b198eefe.jpg)(http://images.tapatalk-cdn.com/15/10/22/7a853ca298ce7ea0af4b91513cb92074.jpg)
-
This looks like the best one you've done yet!
-
Looking good thats for sure
-
This looks like the best one you've done yet!
Thanks I think it's turning out good so far!
-
Looking good thats for sure
Thanks man!
-
I'm jealous!!
None of my round fender pickups ever looked that good. It WAS forty years ago! SO EMBARRASSING!!
-
Looking good.
-
I'm jealous!!
None of my round fender pickups ever looked that good. It WAS forty years ago! SO EMBARRASSING!!
Ha thanks man I appreciate the kind words!
-
Looking good.
Thanks man!
-
Got some work done the last couple days and had a few set backs as well. I got all the lights wired front and back and mounted all the stuff under the dash I made brackets so I didn't have to drill any new holes in the firewall. I was trimming my radiator support with the radiator in and knicked a core so I'm waiting on a new radiator to start mocking the hoses up with. I asked my boss if I could use the tig welder at work to fix it and he gave me the ok so I'll do that at a later date I hope! (http://images.tapatalk-cdn.com/15/10/26/0001bf02476f89c0a7ab493e4a2b6ecc.jpg)(http://images.tapatalk-cdn.com/15/10/26/0e87d43e218ce427ab188d7140c679d0.jpg)(http://images.tapatalk-cdn.com/15/10/26/c1cb776234f0c6b02fec1f78c5c49c2d.jpg)(http://images.tapatalk-cdn.com/15/10/26/192a73ab791f1bb134f3fc5eb934f29f.jpg)
I am hoping to take it to get it wired up by the end of the week of all goes well. I still need to paint the inside and get the doors on but shouldn't be a problem. I also had my computer flashed today along with another that I'll use for a future build on the 52 gmc I have. I'd like to be driving it before thanksgiving if everything works out!
-
You and I have the same goals. I want to drive lockjaw before Thanksgiving too.
Man!! It looks good!!
-
Awesome you got the lights wired in. Sorry to read about the radiator, that's a bummer.
-
You and I have the same goals. I want to drive lockjaw before Thanksgiving too.
Man!! It looks good!!
I hope you make it!
-
Awesome you got the lights wired in. Sorry to read about the radiator, that's a bummer.
Yea and it could have been avoided but live and learn I guess!
-
Inside is in primer may paint it tomorrow if I'm lucky! (http://images.tapatalk-cdn.com/15/10/30/17d24c9f0916f5f6cdf36f83f79e3420.jpg)(http://images.tapatalk-cdn.com/15/10/30/5765f8bbd63223a0fab748b7a355f6c8.jpg)(http://images.tapatalk-cdn.com/15/10/30/ed6f7f5c53f233ae8c812a699f7711c3.jpg)
-
Got it all painted inside now to wait on it to dry. I've got plenty to do while I wait tho!(http://images.tapatalk-cdn.com/15/10/31/59f94cd31a0b7aa8ec3b5afbdb88fec8.jpg)(http://images.tapatalk-cdn.com/15/10/31/ebcdea13eaf769c2eb10b723ac8aab4a.jpg)(http://images.tapatalk-cdn.com/15/10/31/14b06a6ecfa51c4a6a45afdd1ed2b37c.jpg)
-
Got a bunch done this weekend. The interior is almost done I got my gas cap where I wanted it and got the radiator in with all the hoses made. I got a few small things to do and it goes to get wired up Wednesday I hope!(http://images.tapatalk-cdn.com/15/11/02/54a1acc4951d888f7387c026c05e6818.jpg)(http://images.tapatalk-cdn.com/15/11/02/fddfa49516505d744c8efdfa99284bd7.jpg)(http://images.tapatalk-cdn.com/15/11/02/c7dbc1a46203ccaa52940bcd3b1f4145.jpg)
-
Ha ha, did you just hammer out that spare tire recess to reverse it? I always wondered if that could be done, but I thought I'd probably cut it out, invert it, then re-weld it back in.
-
Damn, that is looking really good.
-
Ha ha, did you just hammer out that spare tire recess to reverse it? I always wondered if that could be done, but I thought I'd probably cut it out, invert it, then re-weld it back in.
Someone hammered it in so I hammered it back out! I've heard you can cut them out and flip them tho.
-
Damn, that is looking really good.
Thanks I'm really liking the look of this one!
-
I had a set back with a bad proportion valve but I did get it done Thursday and took it to get wired up!(http://images.tapatalk-cdn.com/15/11/06/e6cb5a614290992db9a0f059c74753be.jpg)(http://images.tapatalk-cdn.com/15/11/06/3eb61e285076d23ac253eb9a4415d94e.jpg)(http://images.tapatalk-cdn.com/15/11/06/3f5c3fe3347ca259862c52b5f3ffe12a.jpg)
-
He got it running but still likes a few things!https://vimeo.com/144937486 (https://vimeo.com/144937486)
-
That's your best one yet!
-
Sure is looking good!! I reckon I'll start on my wiring when I get done with this passenger door. Seems like you and I are keeping pace with each other.
I haven't had one of those trucks since before I got married and that's been forty years!! If it wasn't for the FC 170 I have in the works, I'd be looking for a nice five window myself!!
Come to think of it, the Jeep IS a five window !!!
-
That's your best one yet!
Thanks! I think so to its got a real good look going so far. I've got another Fulton visor that I plan on using. My wife says it looks just like my last truck that I built its twin.
-
Sure is looking good!! I reckon I'll start on my wiring when I get done with this passenger door. Seems like you and I are keeping pace with each other.
I haven't had one of those trucks since before I got married and that's been forty years!! If it wasn't for the FC 170 I have in the works, I'd be looking for a nice five window myself!!
Come to think of it, the Jeep IS a five window !!!
I'm starting to wear down I'm glad this one is almost done! You are making good progress and that Coe truck would look cool as a low car hauler!
-
I really don't want to drop the Jeep too far! I worked my A$$ off finding all of that one ton 4WD stuff and I'd have to move the engine back to get past the front differential.
This one is somewhat an homage to a truck my dad had when I was a kid. He bought it new and we split, widened, and raised the bed and used it for plowing snow. Back then we hauled cinders to spread where ice would form to keep it from getting slick. He bought it new in November of 1961 and paid it off in March of '62 with the proceeds of the plowing jobs. i had lots of fun in that truck, but he had to trade it in on a bigger one a couple of years later.
-
I really don't want to drop the Jeep too far! I worked my A$$ off finding all of that one ton 4WD stuff and I'd have to move the engine back to get past the front differential.
This one is somewhat an homage to a truck my dad had when I was a kid. He bought it new and we split, widened, and raised the bed and used it for plowing snow. Back then we hauled cinders to spread where ice would form to keep it from getting slick. He bought it new in November of 1961 and paid it off in March of '62 with the proceeds of the plowing jobs. i had lots of fun in that truck, but he had to trade it in on a bigger one a couple of years later.
That's a cool story and a good idea to help keep a memory a living!
-
She is running and driving! Got the exhaust done yesterday and also a bunch of other stuff! My gauges are in and working along with the radio I buttoned up the doors with the panels. I put my visor in etching primer last night and hope to paint it today. (http://images.tapatalk-cdn.com/15/11/12/80269968dc691cdada1a01cf7440f658.jpg)(http://images.tapatalk-cdn.com/15/11/12/242ada74fbaf1cdbcae0072906d43f95.jpg)(http://images.tapatalk-cdn.com/15/11/12/bf352d4c76b170fadc58954de29b7714.jpg)(http://images.tapatalk-cdn.com/15/11/12/3dcd722a2964b1f9f27563e9899cd3dd.jpg)
-
That's awesome, congrats on such a quick build. Gauges look awesome.
-
That's awesome, congrats on such a quick build. Gauges look awesome.
Thanks brother I appreciate it!
-
DAMN!!! Now I'm really JEALOUS!!!
Great job!!
-
DAMN!!! Now I'm really JEALOUS!!!
Great job!!
Ha you will be driving yours before Thanksgiving I hope!
-
Got my visor on and took her for a drive today! I guess she is almost complete other than wipers and cutting the bed tubs down.(http://images.tapatalk-cdn.com/15/11/14/c1f25ef705e2cb2eefadc93f47bad705.jpg)(http://images.tapatalk-cdn.com/15/11/14/8870af19523d62b5704c54eaee043187.jpg)
-
I'm STILL jealous!! You're ready to put some miles on that piece now!!
-
I'm STILL jealous!! You're ready to put some miles on that piece now!!
Got 64 miles on her now!
-
I cut the bed tubs down tonight got them all in and ran out of shielding gas so I guess I'll go to Tractor Supply tomorrow sometime! I'll order me a wiper motor Monday if I don't change my mind. Guess I'll have to stay on the GMC I have to pass the winter months!(http://images.tapatalk-cdn.com/15/11/14/c3e243343b647ae3a28f907732b00eb4.jpg)(http://images.tapatalk-cdn.com/15/11/14/f60303510289b6a42908b78b2dede1da.jpg)(http://images.tapatalk-cdn.com/15/11/14/104da9e3ce4fd600695296f72414dee8.jpg)
-
That looks awesome.
-
That looks awesome.
Thanks man!
-
Wow clean!
iPhone sent this was
-
Wow clean!
iPhone sent this was
Thanks!
-
Pretty much done! I got my wipers done and added some 6x9 speakers under the seat. Today I took the hood back off and put the new cowl rubber on to reduce the rattling going down the road. I need to add some sound barrier and put some carpet in but I like to look at the metal floor lol(http://images.tapatalk-cdn.com/15/11/22/450bba178e4ccbc512e8d7927e5892ab.jpg)(http://images.tapatalk-cdn.com/15/11/22/90b9746367a633be79fe3e3367314e1f.jpg)(http://images.tapatalk-cdn.com/15/11/22/ed29c68ce7b1b887a1b337f44474dcb5.jpg)(http://images.tapatalk-cdn.com/15/11/22/8a41d065dc67972ba5bd7d400a7a1220.jpg)
-
Done just in time to cruise....in the snow. Looks good!
-
You got wipers. Now! So long as the heater works, you're good to go!!
Congrats man!! Great job!!
-
Done just in time to cruise....in the snow. Looks good!
I know maybe they will pay me to do some snow plowing! Thanks!
-
You got wipers. Now! So long as the heater works, you're good to go!!
Congrats man!! Great job!!
Thanks man! The heat works decent I guess I wish it put more on the windshield side and less on the floor but I can deal with it!
-
Since I've almost finished this one I drug the other one up next to the garage to start tinkering with it!(http://images.tapatalk-cdn.com/15/11/24/3c8c46ac52e52f0e13c6164ef3fea3d3.jpg)(http://images.tapatalk-cdn.com/15/11/24/7fcd42dabfd98b94d31c44f8956be95b.jpg)
-
(http://images.tapatalk-cdn.com/15/11/24/73a18d448574fb3d13d659c96c696411.jpg)
-
Gotta' keep movin'!!
-
Gotta' keep movin'!!
This one will be a slower build!
-
Damn, you have these builds down toa fine art.
-
No chit. He builds 6 quicker than I can do one. :o
-
Damn, you have these builds down toa fine art.
Thanks brother I appreciate that!
-
No chit. He builds 6 quicker than I can do one. :o
I do find myself slowing down lately!
-
Hey Hollis!! You gonna' keep one of these??
-
Hey Hollis!! You gonna' keep one of these??
Yeah, ha ha, if he keeps it up, eventually he'll get the hang of it! ;D
-
Hey Hollis!! You gonna' keep one of these??
Yeah, ha ha, if he keeps it up, eventually he'll get the hang of it! ;D
Yeah!! With all of the R&D he's done he could fab up and sell kits for doing this!!!! 8) 8)
-
(http://images.tapatalk-cdn.com/15/12/17/8259e1a4e527b167f609ebda97a44dda.jpg)
Gotta keep this one at least until April to take to the spring Rod Run in pigeon forge after that who knows!
-
That's cool!! Maybe I can have all of the details on Lockjaw done by then!! I'm just northwest of Nashville!!!
-
That's cool!! Maybe I can have all of the details on Lockjaw done by then!! I'm just northwest of Nashville!!!
I'm going to try to make the Motorama show in Murfreesboro on January 9th of we don't get snowed in!
-
That's real close to me!! My brother lives in M'boro. Where do you live??
Remind me when that one gets a little closer. If I'm not gigging, I'll meet you there!!
-
That's real close to me!! My brother lives in M'boro. Where do you live??
Remind me when that one gets a little closer. If I'm not gigging, I'll meet you there!!
I live in Stearns Ky it's a little over 3 hour ride for me but hoping to make it with the truck! I'll let you know when it gets close.
-
I know exactly where Stearns is. I used to shoot in Onieda, actually Winfield, Tennessee almost every month. The train ride in Stearns and the train station are neat and there used to be a great restaurant there.
Again!! Keep me reminded and I'll do what I can to meet you at the Motorama!
-
I live 2 minutes from the train depot. The old restaurant burnt down but there is another around the corner. I'll be sure to yell at yah if I get to come that way!
-
Here's a little video of the 5.3 in action!https://vimeo.com/149582450 (https://vimeo.com/149582450)
-
Great video and the truck sounds awesome.
-
Yeah, I like the sound of it too, especially when you backed out of it.
-
Thanks guys! The Ls based engines have a different sound than a normal small block I think!
-
It does have a different sound, wicked is how I would describe it.
-
Got Josephine all cleaned up and warm weather all weekend!(http://uploads.tapatalk-cdn.com/20160326/609f35c5ecdafde4516b498241eb74a6.jpg)(http://uploads.tapatalk-cdn.com/20160326/f0cef303cd681049a90a627139cf5243.jpg)
-
Looks better than great! Did you shoot some clear over the original paint? Looks shinier. Maybe I missed where you said it.
-
Looks better than great! Did you shoot some clear over the original paint? Looks shinier. Maybe I missed where you said it.
I have her a Comet and soap bath then waxed her. Polished all the chrome and stainless she sure does clean up! I'm almost tempted to paint back the original Cape Maroon this winter.
-
Looks better than great! Did you shoot some clear over the original paint? Looks shinier. Maybe I missed where you said it.
I have her a Comet and soap bath then waxed her. Polished all the chrome and stainless she sure does clean up! I'm almost tempted to paint back the original Cape Maroon this winter.
-
Looks better than great! Did you shoot some clear over the original paint? Looks shinier. Maybe I missed where you said it.
I have her a Comet and soap bath then waxed her. Polished all the chrome and stainless she sure does clean up! I'm almost tempted to paint back the original Cape Maroon this winter.(http://uploads.tapatalk-cdn.com/20160326/6ed0483825f9d6ca209eecf3cdb269bc.jpg)
-
That looks GREAT!!
-
Amazing...
-
Thanks guys! I sure like my Josephine!
-
You gonna' keep this one??
-
Hey hollisc10, you've probably put window seals in a AD truck - how do you get the outer rubber window sweep into that slot it rides in? Looks like a force fit, but so far that's not working!
-
Hey hollisc10, you've probably put window seals in a AD truck - how do you get the outer rubber window sweep into that slot it rides in? Looks like a force fit, but so far that's not working!
There is a small slot in the channel that you can start the seal in. I have had to pry the channel open a bit to get the rubber in and then close it back with a hammer and punch after its in.
-
You gonna' keep this one??
For a while I hope!
-
Hey thanks for the info - right on, as always. A little dish soap helped it go in. And lots of swearing :-X
-
Hey thanks for the info - right on, as always. A little dish soap helped it go in. And lots of swearing :-X
If I don't swear somethings wrong glad you got it!
-
What day you plan on being at the Rod Run or you saying for the weekend?
I'll be there Saturday for sure but I may be there Friday as well. Prolly be in Clifford (rusty 77 green Ford)
-
What day you plan on being at the Rod Run or you saying for the weekend?
I'll be there Saturday for sure but I may be there Friday as well. Prolly be in Clifford (rusty 77 green Ford)
Plan on coming down Friday and staying until Sunday if nothing happens.
-
(http://uploads.tapatalk-cdn.com/20160422/8fe62fc1e5649f0566266aad2acb0042.jpg)
Started to a little show today I made it, but my friend had to turn around it started raining so hard he couldn't see.(http://uploads.tapatalk-cdn.com/20160422/364dadf8c01c4e34f50e1e497bd6d911.jpg)
-
Started to a little show today I made it, but my friend had to turn around it started raining so hard he couldn't see.
Yeah, those fenderless cars are bad in rain. The water spray comes off the front tires right into your windshield.
-
:P :P That looks almost like Lockjaw in front of ya!! :P :P
-
Started to a little show today I made it, but my friend had to turn around it started raining so hard he couldn't see.
Yeah, those fenderless cars are bad in rain. The water spray comes off the front tires right into your windshield.
He didn't have any quarter glass or door glass so it just sprays everywhere.
-
:P :P That looks almost like Lockjaw in front of ya!! :P :P
It sure is close its all hand made except the cowl a guy here local makes them. He usually puts Rats Nest on the doors.
-
Well....
Have ya' figured out if you'll make the Rumble??
-
Dang, that's a bummer
-
Well....
Have ya' figured out if you'll make the Rumble??
my anniversary is the 8th of May so probably not.
-
Added another 300 miles on the clock today!(http://uploads.tapatalk-cdn.com/20160507/a87291710bcbae0ff7c6eda6b4bd9e4f.jpg) RedNeck Rumble was ok but was expecting more.
-
DAMMIT!!! I saw the truck, but missed you!!
Got another 120 or so on the li'l feller myself!! Me and the wife walked right by ya's!!!
We need to swap phone #s so's we can text or call 'n' give a heads-up!!
-
DAMMIT!!! I saw the truck, but missed you!!
Got another 120 or so on the li'l feller myself!! Me and the wife walked right by ya's!!!
We need to swap phone #s so's we can text or call 'n' give a heads-up!!
I'll send you a pm with my number. We sat on the bench behind the trucks what time we weren't out walking! Your car has taken a life of it's own now and looks good!
-
Changed the wheels out for a while!(http://uploads.tapatalk-cdn.com/20160627/d854e6333353298122c52ab3cd81bfe5.jpg)
-
That thing gets better every time I see it!!!
-
That thing gets better every time I see it!!!
Thanks I like her!
-
That new one you got, you need to give me a call!! I got somebody that might be interested in you building it for him.
-
Those wheels look good.
-
That new one you got, you need to give me a call!! I got somebody that might be interested in you building it for him.
I'll give you a call in a day or so. I bought another one this week a few friends and I took a road trip to North Dakota and I picked one up a long the way!(http://uploads.tapatalk-cdn.com/20160701/17e25c65d34e6ec9263383b7e626953c.jpg)
No rust a super solid truck!
-
Those wheels look good.
Yea I think so too!
-
(http://uploads.tapatalk-cdn.com/20160829/434f9664d13ecbe5fdf70ed61e07df48.jpg)
Made a show with my Josephine this weekend and got a couple good photos at the dealership!
-
Great pic
-
That li'l darlin' is a HEARTBREAKER!!!
-
Thanks guys! She's a beauty!!