Rat Rod Nation - A place for motorheads
Rat Rod Nation builds => Rat Rod Transmission, Rear End Discussions => Topic started by: just old on November 12, 2014, 04:05:07 PM
-
this is the final on the rear I have change this a couple times but this is it
-
I'm using an 8.8" in mine as well. How thick are those spacers and where did you get them?
-
2 inch got them at adaptor king . I went from a 4 lug to 5 they were around $80.00 I piece . I do not know if that is bad or good
art
-
Thanks, I don't know either...
-
This is where i buy mine from....http://www.ezaccessory.com/Billet_Wheel_Adapters_s/25.htm (http://www.ezaccessory.com/Billet_Wheel_Adapters_s/25.htm)
-
This is where i buy mine from....http://www.ezaccessory.com/Billet_Wheel_Adapters_s/25.htm ([url]http://http://www.ezaccessory.com/Billet_Wheel_Adapters_s/25.htm[/url])
Thats a kool site to index. But "Billet" wow something about that and a rat >>>> ;D LOL
-
LOL.......totally agree, but you can't see em. atleast mine aren't viewable.
-
Thanks for the link, those look like some pretty good prices!
-
for the money, they come in pairs, so if you need one size for the rear and one size for the front, you end up paying a decent price and can do the whole car.......
-
rear installed and complete coil springs from sprint car 175 # shocks used and free . wheel spacers in side of wheels and don't show . also got fan installed today
-
Are there any saddles/perches on the rear end where they attach to the lower control arms? The reason that I ask is that without upper control arms, I think that the rear end will want to twist under load and without something to stop it, I think that it might just succeed...
-
the u bolts are tack welded to the rear about a 1/2 in weld on at 3 spots on each side . should not be a problem I hope
-
That should do the trick.