We'll I have a few ideas rolling around n my head guys. But I'm wondering what the best frame material would be. I'm going to be building a rat rod with a custom frame. It's getting a p-pumped 12 valve cummins and a manual valvebodied 47rh. The cabs still up in the air I'm thinking old Duce and a half cab chopped, sectioned, and have the chop raked forward a bit. And it's going to have a dually rear end and the beds going to just be big enough to put a fuel cell and rear end components. Front end is still up in the air but I'm thinking split wishbones and bags front and rear. Would 2x4 tubing be strong enough if I have a good amount of cross members? Or would I need something stronger? The 12 will stay pretty much stock for now but I do want to upgrade in the future so frame will have to accommodate that
