Rat Rod Nation - A place for motorheads

Rat Rod Nation builds => Rat Rod Frame/Suspension/Brake Q&A => Topic started by: just old on August 19, 2014, 04:05:41 PM

Title: new problem
Post by: just old on August 19, 2014, 04:05:41 PM

just checking ride higths and realized the frame is 1/2 lower on the driver side in the front and 3/8 lower in the back . any ideas ?
checked everything I can see don't under stand it . and it may be and easy fix I just do not what it is .help :(

Title: Re: new problem
Post by: lowboy on August 19, 2014, 05:04:26 PM

I shimmed my body may not be proper but Im the only one that knows :o Oops let my little secret out

Title: Re: new problem
Post by: obama on August 19, 2014, 07:46:58 PM

Springs would be where I look first, and how there mounted ( straight or not)

Title: Re: new problem
Post by: hotwheels on August 20, 2014, 04:30:40 PM

Is the engine sitting in the frame? Sometimes the builds will appear off until all the heavy parts are sitting in and on the frame.

Title: Re: new problem
Post by: obama on August 20, 2014, 08:44:04 PM

One more thought before you fire up the cutting torch, check tire height at wheel and hub.

Title: Re: new problem
Post by: just old on August 21, 2014, 07:41:14 AM

yes the motor is in trans . motor 80 % to gather . I will check wheel hights